V3.1 MR2 Windows/Linux May 15, 2012
Corrections
Conversion from Word
*An error was returned when judging whether there was a section format within the paragraph format.
*Text overlapped within the header when there was no line break immediately after the section.
*The conversion did not end when “Repeat as header row at the top of each page” in the Table Properties was checked.
*Text in a table disappeared when the border was specified to the paragraph in a table cell.
*The conversion did not end when a table went across the page.
*Text boxes overlapped followed by text failure to acquire the correct line height.
*Curved lines were outputted differently in regards to length.
*The position of a header was incorrect.
*The “Missing font family” error occurred when the specific style was set to the paragraph.
*An error occurred when outputting a nested table.
*The position of a figure shifted.
*The MS Mincho font family caused Adobe Reader to prompt the user to install a Japanese Language Support update.
*The position of a shape in a table outputted incorrectly.
*There was a problem in reading the processing of Shape data, so an infinite loop occurred.
*The conversion failed when processing the section format within the paragraph format.
Conversion from Excel
*An application error occurred when reading the file which contained a chart sheet.
*There was a problem in font processing in a file when three or more OLE classes were embedded and the conversion failed.
Conversion from PowerPoint
*Raw height of a table was outputted shorter.
*There was a problem in the line break processing of WordArt which caused different character sizes.
*There was a problem in calculation of the text area of a figure, the text was cut off.
*When a picture frame did not have the raster image and did not fill background, an adjoining figure was missing.
Conversion from PDF
*An error occurred when reading PDF files with abstract keywords.
*When processing the mask image, the background color was not reflected.
Conversion to SVG
*Down-sampled images were not accurately scaled.
*Due to a problem in error judging, an error occurred when converting files, which had no problems with the previous version.
*A table in Word was rendered too small due to a problem when saving the format.
V4 R1 Windows/Linux March 27, 2012
Enhancements
1. PDF library enhancement
-Enhances the reading capability of PDF
2. Support for Windows 64bit version module
3. Excel : capability to read Excel data per sheet
-This will enhance the processing speed
4. Support for reading Microsoft RTF
5. Modify error information regarding Office password protected files
-Optimizes the error message processing associated with the support for Office open password
6. Support for reading Office 2007/2010 password protected files
V3.1 MR1 Windows/Linux September 22, 2011
Corrections
Conversion from Word
*When the header or footer contained a tab, text decorations were not processed.
*Images in the header were not output correctly.
*When page breaks were inserted continuously, some pages were not outputted.
*When a bookmark’s starting position was set outside a table and ended inside a table, hyperlinks were not converted correctly.
*Center aligned or right aligned auto shapes were not placed correctly.
*Flame layouts with no text wrapping were not processed correctly.
*When the table style was specified, the conversion finished by outputting only the first single character.
*When the border was arranged in the layout frame, the left end of the border inside the frame was hidden.
*The underline was not converted when it was specified to the page break code.
*Line numbers set to the captions were not outputted correctly.
*Text with a hyperlink in the hierarchical table was not converted.
*When the paragraph style was specified, the font specification did not convert correctly.
Conversion from Excel
*When only the cell field with valid data was specified as the print range and fit-to-page option was selected, the layout collapsed.
*When specifying fit-to-option and using the default print scaling ratio, the same content was extended over two pages depending on the environment.
*The gradation of the text box did not convert correctly.
*The space between dots differed from the original file.
*The text in the shape was displayed with zero width.
*When slicers were added in Excel 2010, the figure displayed was all black.
Conversion from PowerPoint
*When the OLE data was arranged as an object in Powerpoint 2010, it was not converted and was missing.
*When there was white space at the end of a line, the layout collapsed.
*The arrangement and the margin in a cell were not correctly processed.
*When a line break occurred, the layout of the border collapsed.
*When the figure was arranged just before the end of the page, it was not converted correctly.
*The layout of the vertical writing text in the text box collapsed.
Conversion from PDF
*Failing to read the font information, font sizes were increased.
*Images in the file were not converted and were missing.
*The conversion failed when JBIG2 images were included in the file.
*The color space was not processed correctly and it failed to display.
Conversion to Flash
*Bold and italic specifications were not outputted correctly.
*A white border, which was not in the original layout, was outputted.
Conversion to images
*The background color became black after converting to TIFF.
*JPEG compression was invalid when outputting to CMYK TIFF.
*The file was outputted in reverse when converting from EMF.
Conversion to INX
*The stream output failed.
Other
*The conversion from the text file failed.
*When deleted data in the graph was read, a memory shortage occurred.
*When # was included in the file name, the conversion failed.
V3.1 R1 Windows/Linux/Solaris June 2, 2011
Enhancements
1. PDF Output Support:
- AES-128 bit/AES-256 bit encryption output
- PDF/A-1b:2005 output
2. Supports MS Word 2010 conversions
3. Supports MS Excel 2010 conversions
4. Supports MS PowerPoint 2010 conversions
5. Image Output Support (for Windows only):
- progressive JPEG output
- interlace PNG output
- 256 tone grayscale output
- 256 color output
- GdiPlus smoothing
- TIFF/CMYK output
- TIFF Compression output with the following:
- LZW
- JPEG
- DEFLATE
- RUNLENGTH
- CCITT Group 4
- CCITT Group 3
6. Flash Output Support:
- Allows users to use ActionScript 1.0 to stop random pages, disable page navigation button or links…etc.
- Each individual page from the original file can be outputted to a separate file
- Allows users to downsample raster images with arbitrary sizes
- Enhanced text manipulation including search, select or reverse display…etc. through the text output method
7. Other:
- Support for Microsoft.NET Framework 4.0 (for Windows only)
V3.0 MR5 Windows/Linux/Solaris April 18, 2011
Corrections
Conversion from Word
*The text box in an anchored paragraph in the table cell was not correctly arranged or dropped with Word 2007/2010 conversions.
*The height of the margin was not correctly reflected even if the output position was specified to the figure or the text box with Word 2007/2010 conversions.
*Figures with insufficient attribute information were not outputted correctly with Word 2007/2010 conversions.
*When the text was added between parentheses, it overlapped with Word 2007/2010 conversions.
*Grouped shapes in header/footer were not always positioned correctly with Word 97-2003 conversions.
*When there was a problem in the calculation of the number of lines in one page, the page position would shift with Word 97-2003 conversions.
*Table titles were not effective with Word 97-2003 conversions.
*Unnecessary work files were created with Word 97-2003 conversions.
*Tab positions in header/footer were not correctly positioned with Word 97-2003 conversions.
*Problems with processing occurred when the minimum value was specified for line spacing, which resulted in wide spaces between lines with Word 97-2003 conversions.
*Characters were squeezed together and overlapped with Word 97-2003 conversions.
*When problems with the character-code output for symbol fonts occurred, it resulted in garbled numbers and cirlces with Word 97-2003 conversions.
*The space between lines changed when the OLE object had been inserted with Word 97-2003 conversions.
*The table of contents was not outputted with Word 97-2003 conversions.
*When multiple bookmarks were set to the same position their hyperlinks were lost with Word 97-2003 conversions.
*The position of ruled lines around characters in a table shifted with Word 97-2003 conversions.
*The character attribute settings in Style was not correctly reflected with Word 97-2003 conversions.
*Problems with the default table border occurred so borders were not correctly outputted with Word 97-2003 conversions.
*The header and the body text overlapped with Word 97-2003 conversions.
Conversion from Excel
*Unnecessary text box background was outputted.
*The magnification of the worksheet display in print settings was not reflected, the stroke width was not correctly outputted.
*The magnification of the worksheet display in print settings was not reflected when the font size in header/footer was changed.
*When the number of pages for either width or height were specified, Fit to Page settings in Page Setup were ignored, but now it ouputs with the specified page number.
*When the number of pages for both width and height were not specified, Fit to Page settings in the Scale in Page Setup were ignored. Therefore, the width and height values for only the first page was outputted by default.
*The cell border specified to the row title was outputted to the cell below it.
Conversion from PowerPoint
*Support for the setting of the slide beginning number with PowerPoint 2007/2010.
*Vertical writing in the text box did not rotate when it was specified to rotate by certain degrees.
*When symbols were specified for the bullets in a list, it would result in garble.
*Figures and text with a hidden attribute were outputted and shown.
*The fixed-pitch font was allocated to the alternative font of the variable-pitch font which increased the width of the text.
*Some figures were not able to correspond to the vertical and horizontal flips.
*If the system color was set to a fill color, an invalid color would be outputted. It can now be outputted by setting the color value with the fixed table.
*There was a problem in calculation of the distance between text area and images causing the text to shift.
Other
*The conversion terminated abruptly when -GDI Smooth was specified with the image output.
*There was a problem in detecting file formats, causing text file conversions to fail.
*Sometimes font sizes decreased because the selector of the tagname.classname was not supported with SVG conversions.
*XPS would not convert with the NET Interface. It is fixed now. (XPS output is only available for SBC Plus)
*The conversion failed if # was included in the target file name.
*The default value of 100% when neither width nor height were specified in SVG was applied to the default A4 size with the conversion from SVG. Now it is made available to output the % size as the height and width of viewBox if viewBox is effective when directly converting SVG.
V3.0 MR4 Windows/Linux/Solaris November 10, 2010
Corrections
Conversion from PDF
*Yen mark was outputted as back slash. It is now possible to output the Yen mark in Japanese font.
Conversion from Word
*The width of the row in the table was not correctly acquired and the layout before and after the table occasionally collapsed.
*There was a problem in the judgment of the height of the header and the image in the header was not always outputted.
*There was a problem in the judgment of the Orient character and a line break occurred in the middle of the English word.
*An unnecessary character string in the field was outputted.
*Left margin of a border around the paragraph in header/footer was not considered.
*An extra white space occasionally appeared at the head of the next page because the space set after the paragraph was pushed to the next page.
*An extra white space occasionally appeared at the head of the next page because the space between paragraphs was pushed to the head of the next page.
*There was a problem in acquiring the font and the layout occasionally collapsed due to the difference of the width of the characters.
*The hanging indent was not reflected in the paragraph.
*Text in was missing.
*The margins were wider in the text box and the line break point changed or overflow of text would occur.
*The reverse rotation attribute of a figure was not correctly processed from MR2.
*The text box position in the table and the output order were wrong.
*The line drawing of the paragraph occasionally shifted.
*Borders set around the character strings in the table occasionally shifted.
Conversion from Excel
*Number of copies in the Page Setup was disregarded.
*Line styles were not correctly reproduced. A line occasionally outputted twice.
*Support for conversion of a file deviated from the file format specification of Excel.
Conversion from PowerPoint
*The shadow set to a transparent image was not correctly processed.
*The character from the master template that was not supposed to output occasionally appeared.
*The ”unknown document type” error occurred failing in the file distinction.
Other
*The font size was not always correct when converting to SVG.
*Bold and italic were not correctly reflected when converting to Flash.
*When converting from JPEG to images, there was a problem in acquiring the resolution and the specified resolution was ignored.
V3.0 MR3 Windows/Linux/Solaris September 14, 2010
Corrections
Conversion from PDF
*An encrypted file may fail in decoding.
*Single byte symbols may be garbled with MR2.
*Characters were garbled when converting PDF with incorrect font information.
*Support for ZapfDingbats character sets. (When it is not embedded, it will be garbled in the environment without ZapfDingbats.)
*When the glyph of an embedded font could not be acquired, extra text was generated and garbled.
*Some fonts failed to acquire the width of characters correctly.
*The width of characters was inaccurate, failing in reading font information.
*The font for the charmap of LATIN_1 was missing with MR2.
*The WINANSI_ENCODING font might be garbled with MR2.
*Unnecessary color fills ocurred with R1.
*The jbig2 file failed in reading and images occasionally collapsed.
Conversion from Word
*The “Unknown document type” error occurred failing in distinguishing the 97-2003 file format.
*Parentheses and circular arcs were occasionally color filled.
*An image pasted to a rotating figure did not rotate with the 97-2003 Word format file.
*A conversion terminated abnormally with a Word file with incorrect contents and could not open with Microsoft Word.
*A text box within a table was arranged incorrectly.
*Conversions terminated abnormally with files saved with Fast Save in 97-2003 format.
*The reference method of the width of a cell in a table and the table occasionally collapsed with the 2007 file format.
*Conversion occasionally failed when reading figures.
*Unnecessary line numbers were occasionally outputted.
*Horizontal borders were not outputted.
*Figures in the header were not correctly arranged.
*When a rotation was specified to a grouped figure, the rotation was done incorrectly.
*Text boxes for vertical text were not arranged correctly.
*The size of text in a list differed from the original.
*When there was a Symbol font in a table, characters were not arranged correctly.
*Images were doubly outputted.
Conversion from Excel
*Rotating character strings cut off in the cell boundary.
*Text added to a check box was not arranged correctly.
*Unnecessary characters were added to an image.
Conversion from PowerPoint
*The “Unknown document type” error occurred failing in distinguishing the file format.
*Calculation of the transformation of WordArt that was not correctly outputted with 97-2003 format file.
*An image pasted to a rotating figure did not rotate with the 97-2003 format file.
*The size of circular arcs in the 2007 format file were outputted larger than the original.
*The Persist Directory error occurred failing in reading a large file size.
*Only a part of an image was outputted.
*Support for outputting the transparent images with the 97-2003 file format.
Conversion to Flash
*Figures with color fill might not be reproduced correctly.
*When expanded small figures were arranged, space was occasionally generated.
Other
*The default font-config.xml attached to the program was not correct with MR2.
*When outputting figures to PDF, the “PDF Output Error” occurred with MR2.
V3.0 MR2 Windows/Linux May 17, 2010
Corrections
Conversion from PDF
* GIF images were not correctly extracted while converting from PDF
Conversion from Word
* A memory leak occasionally occurred while reading figures.
* The paragraph in a cell was not correctly aligned when there was an anchor in the figure in the table cell.
* Anchor types in the shape in the cell were not correctly detected in Word97 or earlier.
* The margin of a cell was not considered when putting figures in position.
Conversion from Excel
* Support for dropdown and checkboxes in Excel 97-2003. (They are outputted only when the image for the display is included in the file.)
* When the color specification of a pattern was omitted, it occasionally became black in Excel2007.
* The attribute was not outputted when the cell did not exist but there was only a line or a row attribute.
* The text occasionally shifted when Centered on a page – Vertically was specified in Margins settings in Header/Footer.
* Invalid figures with height and width of 0 are now skipped to avoid an error.
* When memory shortage occurs, an error is now returned.
* The text was not correctly arranged because the fixed-width font was replaced by the proportional font.
* The content of the cell was not displayed due to the unexpected number format of an Excel file made with Open Office.
Conversion from PowerPoint
* Page numbers embedded in the text box were not displayed when converting from PowerPoint 97-2003.
* The MSSymbol character was not treated as Symbol and occasionally not displayed when converting from PowerPoint 97-2003.
* ClipPath on the image side became undefined when the background had been added to PictureFrame and not outputted correctly when converting from PowerPoint 97-2003.
Other
* There was a problem in the processing of Base64 and the memory leak occasionally occurred while outputting to SVG.
* There was a problem in the reading processing of TIFF tags and failed to convert from TIFF.
* The smallest value that can be specified with rasdpi is now changed to 1dpi.
* A margin of error occasionally occurred in the dpi value set in the image when outputting to images.
* When the image pasted on the original document was JPEG format called Exif, it was not displayed.
* When JFXX (JFIF Extension Format) was included in the original document, it was not possible to output it to SVG, XPS, and Flash.
V3.0 MR1 Windows/Linux April 7, 2010
Enhancements
* Added the ability to apply smoothing by GdiPlus when printing and outputting images.
* The command line option can now specify the watermark in PDF.
Corrections
Conversion from PDF
* JBIG2 compressed images were sometimes not being uncompressed correctly.
* A memory leak occurred.
Conversion from Word/Excel/PowerPoint
* When Fill Color was specified to a figure with a zero width and height value, the unspecified part was also color filled.
Conversion from Word
* Support for form controls.
* When the bottom margin has minus value in the page settings, the arrangement occasionally collapsed.
* When a continued English word exceeded 1 page, the page didn’t break correctly.
* The section number of a paragraph was not correct when the paragraph contained a page break.
* An unnecessary character attribute was occasionally applied in Word2007.
* When the table included a table, the position of the indent against inside of the table occasionally shifted incorrectly in Word2007.
Conversion from Excel
* Support for form controls in Excel2007. (Borders and fill colors on a checkbox control are not supported. 3-D effects on a checkbox control are not supported. They are converted as if these are not specified.)
* Because hidden rows were not considered, an unnecessary white space was occasionally outputted.
* When checking the existence of a cell and a figure, an unnecessary white space was occasionally outputted.
* The position of a figure occasionally shifted because line title and row title had not been considered.
* A large table might not be converted due to the memory shortage. The memory use has been improved.
Conversion to Flash
* A figure expressed with the exceeded range of the coordinate system is now available to output by reducing the coordinate system and making it within the Flash specification.
* The downsized image is now available to output so as not to grow as much as possible and keep the same format before downsizing with Flash output.
* The problem occurred in the operation of Adobe Flash Player when there was a pass with zero height.
* The text range might not be correctly outputted to the frame.
Other
* Numerical values specified to watermark-font-weight in the option setting file was not effective.
* TIFF output with the rasgdi+ setting is improved.
-When -rasmono was specified @MTIFF was not outputted in the monochrome mode.
-@TIFF was outputted by 32-bit color.
-The size of the output file occasionally became abnormally large. (The problem still remains when rasgdi+ is not specified. We recommend to use rasgdi+ setting.)
-The size information on the Exif tag was not read when reading the JPEG(Exif) file.
* Depending on the Viewer, bullets in SVG appeared as missing character.
V3.0R1 Windows/Linux January 11, 2010
Enhancements
* Support for SWF (Adobe Flash) output.
* Support for input Multi-page TIFF with Standard/Plus version.
* Support for output Multi page TIFF with Standard/Plus version.
* The C/C++ Interface has been added.
* A watermark can now be placed on the PDF.
* Pages can now be outputted one by one without waiting for the completion of the entire conversion with SVG output. This reduces the memory consumption during the conversion.
* Support for pattern fills.
* Support for headers/footers in Excel documents. *Images in headers/footers are disregarded.
* Support for line numbers in Word documents.
Changes
* The product lineup has been changed to the following three types.
*Standard PDF Output version
*Standard Flash Output version
*Plus version (Available for all supported output/input formats)
* The version number is now added to the dll name in Linux/Solaris version.
* In Linux 32bit version, libstdc++.so.5 has been changed to libstdc++.so.6.
* In Windows version, “Microsoft Visual C++ 2005 SP1 Redistributable Package” is now automatically installed on the necessary environment
V3.0 Beta Windows/Linux Release November 16, 2009
The version has been changed from V2.1 to V3.0
Enhancements to SWF (Adobe Flash) output
* Support for a hyperlink to the bookmark within a document
* For convenience, the page navigation button has been moved from the bottom to the upper left of the page. No need to scroll down the page to use the button.
V2.1 Alpha Release October 15, 2009
Enhancements
* Support for Adobe Flash output with Plus version
* Support for pattern fill
* Support for printing transparent images
* Support for inputting/outputting multi-page TIFF
* The C/C++ Interface compiled with libstdc++.so.6 is now added
* A watermark can now be placed on the PDF
Other
* The name of DfvDMC.dll has been changed to DfvDMC21.dll
V2.0 MR5 September 25, 2009
Conversion from PDF
* Corrected error which occurred when an ID from PDF Trailer Dictionary had comments
* Corrected error which occurred in the encoding of a FreeType font, that when embedded displayed garbled characters
* Corrected error that occurred when an image was SeparationColorSpace, that caused the color not to convert
* Improved the color conversion accuracy from Lab color spaces
Conversion to PDF
* Corrected an occasional application error which occurred when an incorrect image was included in the original document
Conversion from Word
* Corrected an occasional error which occurred when center alignment in a paragraph was specified but the paragraph had no characters
* Corrected an error that caused improper line spacing in a paragraph which occurred when the paragraph contained only a line feed and followed an instance of a table that was nested in a cell of another table
* Corrected an error which caused text and image overlaps in headers/footers
* Corrected an error that caused characters to overlap when kerning was specified to proportional font
* Corrected an error that that resulted in incorrect table positioning when horizontal table positioning was specified relative to a vertical writing paragraph
* Corrected output font error that occurred when the character string length of a vertically-written proportional font was not correct
* Corrected error that resulted in incorrect placement of a marker put on the character attribute of the last code (line feed code) in a cell
* Corrected error that resulted in incorrect processing of Text wrapping around a table
* Added check box conversion with Word 2007 (Not available with Word 97-2003)
* Corrected error that resulted in incorrect rotation when fill color and rotate were specified to an image
* Corrected error resulting in unnecessary clipping of a figure contained in the original document (occasionally resulted in a missing figure)
* Corrected error that resulted in missing footer when the position of a figure in a footer was not outputted correctly
* Corrected error that resulted in broken words appearing with no hyphenation character (-)
* Corrected error that resulted in incorrect numbers in ordered lists in the document (numbers did not increment correctly)
* Corrected error where the image (footer line) added to a paragraph with the tab was not correctly arranged
Conversion from PowerPoint
* Corrected error that caused bullets not to convert
* Added support for conversions of the header/footer of the master slide
* Corrected error that resulted in an extra linefeed when white space at the end of a line extended across the text frame
* Corrected error that caused Japanese symbols at the top of a line
* Corrected error that resulted in incorrect rotation when fill color and rotate were specified to an image
Conversion from Excel
* Corrected error with Excel 2007 that resulted in shapes in a chart (graph) being dropped
* Corrected error that resulted in an abnormal program stop when an invalid preview format was specified to the cell where axis label of the chart (graph) referred on a chart
* Corrected error that that resulted in incorrect rotation when fill color and rotate were specified to an image
Other Conversions
* Corrected error that resulted in unnecessary color fill to be outputted to SVG (the color fill specified just prior to the output had not been cleared)
* Corrected issue that prevented files with Unicode file names from opening
* Corrected issue that caused unnecessary error messages to appear when the initialization of the error information was insufficient
V2.0 MR4 June 10, 2009
Conversion from PDF
* Characters are now converted even when encoding is not specified
* Corrected issue that resulted in RSBC occasionally failing to read a password
Conversion from Word
Enhancements:
* Highlight colors can now be converted
Fixes:
* Corrected issue (with the height and width of the text area) that resulted in repetitive page output when documents containing tables, using the vertical writing mode and text wrapping were input
* Corrected issue that resulted in shifting character positions when the font size of the character string and the line feed code were different
* Corrected issue that resulted in hidden text appearing in a PDF
* Corrected issue that caused the program to read specified font properties of a paragraph and convert them differently than the source.
* Corrected alignment issue that resulted when a hyperlink was right aligned or justified
* Corrected vertical writing mode issue where text boxes were not converted.
* Corrected bug that resulted in hyperlinks and bookmark to output incorrectly
* Correct issue that caused a double strikethrough specified to a font not to be converted.
* Corrected an issue that sometimes resulted in conversion failure when a blank WMF was inputted
* Corrected issue that cause shadings within the table cells to incorrectly convert
* Corrected issue that resulted in incorrect table placement in the PDF when in a multi table document included text wrapping
Conversion from Power Point
Enhancements:
* Support for merge table cells in PowerPoint2007
* In PowerPoint2007, the line height of a table can now be adjusted to fit the amount of the text in the cell
Fixes:
* Corrected issue that resulted in shapes with the elbow connecters to convert incorrectly.
* Corrected issue that resulted in incorrect arrangement of text strings within the ribbon shape.
* Corrected issue that resulted in incorrect placement of bullets within a list.
* Corrected issue that resulted in bullets occasionally being placed on the following line if the list ended with a feed line.
* Corrected issue that occasionally caused figures added to the slide master was not to output.
* Corrected an issue which caused the position of a bullet to shift vertically when bullet size was specified.
* Corrected an issue that occasionally resulted in footers not being outputted.
* Corrected issues with incorrect Character arrangement
Conversion from Excel
* Corrected and issue that resulted when a character string continued on the following next page, the portion sent to the next page was not correctly outputted.
* Corrected an issue that resulted in conversion failure when a blank WMF was inputted
* Corrected issue with incorrect text box placement.
* Corrected the following border issues:
o Extra cell borders were outputted
o Cell borders were displayed placed even when overflow text was present
o Cell thicknesses were inconsistent
V2.0 MR3 February 27, 2009
Enhancements:
* Supports Linux 64 bit version.
Fixes:
1. Conversion from PDF
* Improved processing speed. Initialization process was examined and improved so unnecessary images were not read
* Corrected a problem in processing of Functiontype0 which caused the gradation to convert incorrectly
* Corrected problem in recognition of InlineImage where result contents were missing
* corrected problem reading processing of Form Xobjects where after the 2nd page a Form Xobject might not be read.
* corrected problem with the indirect referencing to /Rotate that did not work correctly.
* corrected system crash when converting a broken PDF.
* Corrected problem in creation of an image that resulted in INX conversion failure.
2. Conversion to PDF
* Corrected bug resulting in conversion failure when BMP REL4/REL8 compression type was contained in the original document.
3. Conversion from Word
* Corrected bug that resulted in Roman numerals in MS Mincho outputting in Times New Roman.
* Corrected bug where the page number was outputted twice since both the calculation result of the page field and the result of the field saved in the document were outputted.
* Fixed problem where a character string with hyperlink in a table was missing when converting from a Word2007 document.
4. Conversion from Excel
* Corrected system crash when generating character strings in a cell without the row width. Unnecessary processing was deleted.
* Corrected error that the entire sheet was converted even if the range of print area was specified.
* Corrected color error when a pattern was specified for fill color in the cell.
* Office files can now be converted when information for displaying shapes (VML) pasted from the other documents is embedded in
the document.
* Fixed bug.with a grouped chart (graph) not always converting.
* Fixed bug where shapes in a chart (graph) might not be converted.
5. Conversion from PowerPoint
* Fixed bug causing incorrect arrangement of text when the end line in a text box finished with a line feed.
* Fixed bug causing the background color to render as a different color when converting from PowerPoint97-2003.
* Fixed bug causing the color of the text color to convert incorrectly when converting from PowerPoint97-2003.
6. Other conversions
* Fixed problem when a PNG with excessive image data was contained in the original document caused conversion to fail.
* The work file might be created.
* Fixed problems causing INX and XPS to fail with non-Windows platforms.
* Fixed problem resulting from the misjudgment of the image file type that caused an error with no answer to be returned.
Version 2 MR2 December 23, 2008
Enhancements:
* Word supports the conversion of check box form fields, text box form fields and drop down form fields
* Excel supports the conversion of row or column titles.
Fixes:
1. Conversion from PDF
* PDF was not being converted when processing type3 fonts.
* PDF with shading was not being converted.
* A figure and character were missing when converting to PDF.
* When reading PieceInfo and font information, a character might not be displayed.
* colors in Jpeg2000 images would sometimes not output correctly.
* recognition of RC4 encryption and decipherment failed.
* The color gradation would sometimes differ from the original.
2. Conversion from Word
* fixed the issue of line height in a table producing an unnecessary page break.
* fixed unnecessary output error 20226 (4F02) Conflict media-type: image.
* fixed the issue of the program not reading the background image of the page.
* fixed a text wrapping issue that presented when “Square” was specified which outputted incorrectly.
* fixed the slow reading speed of a document containing numerous shapes.
3. Conversion from PowerPoint
* Bullets in a list were not converting correctly.
4. Conversion from Excel
* Excel 97-2003 text box color when saved by Excel 2007 would fill with black when an incorrect color was specified.
* Vertical writing text boxes were not outputting correctly.
5. Other
* A memory leak problem occurred.
* conversion failed when a document included a jpeg image with an inaccurate color profile.
* Java interface corrections made.
Version 2.0 September 5, 2008
Enhancements:
* Supports the conversion of Word2007/Excel2007/PowerPoint2007.
V1.4 MR5 July 11th 2008
Enhancements:
1. Conversion from PDF
* Supports high compression PDF’s created with PDF Maker and PDF Driver
(print function) of Acrobat 9. (PDF created by PDF version 1.5 or
higher with the highest compression of an object level)
* Supports softmask.
* Supports Function Type 3, Function Type 4 and Device N.
* Supports separation color space.
* Supports color fill shading.
* Supports Masked Images. (stencil mask, explicit mask and color key mask)
* Supports the compressed data format created by JBIG2Decode.
* Supports Default CMYK color space. (ICC Based is not supported.)
Fixes:
1. Conversion from Word, Excel, PowerPoint
* Corrected a bug that garbled the font when the information on the embedded font was in an unexpected order.
* Corrected a bug that outputted white space when certain enciphered data could not be read.
* Corrected a bug causing a triple line to be converted to a single line.
2. Conversion from Word
* Corrected a bug causing the tab position in the text box not to be recognized.
* When converting from an XML word document, corrected a bug that occasionally caused Page Border, surround header/footer options not to work
* Adjusted paragraph spaces when HTML auto spacing in Word compatibility was not selected in the options dialog.
* Removed the unexpected white space created when headers and footers differed on pages.
* Corrected a bug that omitted shapes anchored in a table and outputted them elsewhere.
* Corrected a bug that sometimes omitted the enclosure line specified to text in a table.
* Corrected a problem in processing width when justified, that caused characters to be arranged incorrectly.
3. Conversion from PowerPoint
* Corrected a bug that caused the conversion to fail when there was a
hyperlink without a link destination setting.
4. Conversion from Excel
* Corrected a bug that hid characters when a thick line was specified.
* Corrected a bug that caused a line to become thick when converted to PDF.
RainbowPDF
com